Magnum-venus-plastech PATRIOT 10 PAT-PH-10000 User Manual download pdf (Page 18)

Patriot Powerhead Manual PAT-PH-10000

Rev. 10/2012 Page | 18

Valve Block Assembly:

NOTE: Removable thread locking compound will be required for reassembly.

During disassembly, put one to two drops of removable thread locking compound

on threads of the valve poppet (PAT-PH-5005) and assemble.

NOTE: Replace all O-rings and Seals provided in the seal kit. Apply brown grease

(08465) to all o-rings and seal areas before assembling.

1. Using your thumb push the Valve Piston (MPH-2517) all the way into the Lower

Valve Block (PAT-PH-5002).

2. Apply a small amount of removable thread locking compound to the threads on

one end of the Valve Poppet (PAT-PH-5005) and thread it into the Valve Piston

(MPH-2517) in the Lower Valve Block while holding the Valve Piston with your

thumb.

3. Turn the Valve Poppet in the Lower Valve Block (PAT-PH-5002) so that the hole

in the Poppet body is aligned with the side port.

4. Insert a 7/32” hex wrench through the side port and into the hole in the Valve

Poppet to hold the valve poppet in place, now use a 7/16” socket wrench to

tighten the Valve Poppet into the valve piston. Do not over tighten.

5. Apply a small amount of removable thread locking compound to the threads on

the other end of the Valve Poppet (PAT-PH-5005).

6. Apply some brown grease (08465) to o-ring (O-B-125) on the Upper Valve Block

(PAT-PH-5001) and push it into the Lower Valve Block (PAT-PH-5002) over the

valve poppet.

7. Insert the 7/32” hex wrench through the side port and into the hole in the Valve

Poppet (PAT-PH-5005) to hold the valve poppet in place, now use a 7/16” socket

wrench to tighten the other Valve Piston (MPH-2517) onto the Valve Poppet. Do

not over tighten.

8. Using a 7/16” wrench install the two Hex Bolts (F-HB-04C-08) to hold the Lower

Valve Block (PAT-PH-5002) to the Upper Valve Block (PAT-PH-5001).

9. Install the Hex plug (PF-HP-08) into the side port of the Lower Valve Block (PAT-

PH-5002). Use Teflon tape or pipe seal compound on the pipe plug threads to

prevent an air leak.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 33 34

No comments

Magnum-venus-plastech PATRIOT 10 PAT-PH-10000 User Manual Page 18