Magnum-venus-plastech Megaject MKIV Revision 1_6 User Manual download pdf (Page 35)

Megaject MK V Issue 1_6 Page 35 of 41

Mixer Tubes

See drawing 22020

Mixer tubes will only require replacement if partial or full gellation/sedimentation has

occurred in the injection head. They cannot be repaired and must be replaced.

To replace, remove mixer shroud from head. (If MPG option is fitted, signal pipes

must be removed first.) Remove mixer tube from shroud. Lightly grease new mixer

tube/shroud threads with silicon grease, ensure O ring is in position and replace in

mixer shroud.

Re-attach to mixer head and reconnect MPG pipes. (Blue pipe nearest to mixer tube)

Resin and Catalyst Pipework

See drawing 22022/22028

If air is being drawn into the system, check integrity of all joints and connections

shown.

Joints should be tight and sealed correctly using a proprietary thread sealant. Do not

use sealant on cone and seat type joints.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41

No comments

Magnum-venus-plastech Megaject MKIV Revision 1_6 User Manual Page 35