Magnum-venus-plastech RT-2000 PRO GUN SATURATOR TRIGGER User Manual download pdf (Page 25)

RT-2000 Remote Trigger Manual

Rev. 12/2012 Page | 25

Daily Shut-Down Checklist

ACTIVITIES MUST BE DONE IN THE SEQUENCE SHOWN, AND MUST BE CHECKED OFF

AS COMPLETED. USE THIS CHECKLIST IN CONJUNCTION WITH THE OPERATING

MANUAL FOR THE ULTRAMAX UNIT.

Priority: Put on Respirator as specified for spray painting, Protective Clothing, Eye

Protection, and PVC Gloves

1 Flush the gun with solvent.

2 Wipe the face of the nozzle after flushing.

3 Turn off the main inlet air ball valve at the manifold.

4 Release the solvent flush tank pressure.

5 Remove the nozzle and clean it.

6 Remove the Mix Housing and clean it.

7 Wipe the gun block face with a clean rag.

8 Hang the gun with the gun block exit holes facing down.

9 Open the catalyst recirculation valve on the catalyst manifold

10 Open the resin dump valve located on the bottom of the resin filter.

THE UNIT IS NOW READY.

ABNORMAL CONDITIONS OBSERVED AND CORRECTED

Abnormal Condition

when corrected

OPERATORS NAME: _______________________________________ DATE: ________________

SIGN OFF WHEN START UP CHECKS ARE COMPLETED: __________________________

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 33 34

No comments

Magnum-venus-plastech RT-2000 PRO GUN SATURATOR TRIGGER User Manual Page 25