Magnum-venus-plastech PATRIOT PAT-CP-1530-ADH User Manual download pdf (Page 19)

Patriot Metering Pump Manual PAT-CP-1530

Rev. 03/2013 Page | 19

Pump Assembly:

Seal kit part # PAT-CP-1530-SK

PAT-CP-1530-ADH-SK

Reassembly of metering pump:

1. Install Rod Seals (PAT-CP-1501) and Leak Spacer (PAT-CP-1507) into the

Outlet Body (PAT-CP-1503) in the following order. Rod Seal (O-ring facing

down) then Leak Spacer, then second Rod Seal (O-ring facing down). Push the

stack down into the Outlet Body. Install Retaining Nut only hand tight.

2. Install Spring (04013-1) into the end of the Fluid Rod (PAT-CP-1508). Put the

Piston Ball (9201-1-7) into the Piston Body. Screw the Fluid Rod onto the Piston

Body.

Note: Use a small amount of removable thread lock on the threads of the Fluid Rod.

Do not over tighten as the threads are small and can become damaged easily.

Allow the thread lock to dry thoroughly before putting the pump into service

3. Slide the Piston Seal onto the Piston Body (Piston Seal spring facing up). Screw

the Seal Retainer onto the Piston Body. Tighten the assembly from the Fluid

Rod to Seal Retainer.

Note: Use a small amount of removable thread lock on the threads of the Piston

Body. Do not over tighten as the threads are small and can become damaged easily.

Allow the thread lock to dry thoroughly before putting the pump into service

4. Install the shaft assembly up through the bottom of the Outlet Body (PAT-CP-

1503) so that the threads on the end of the piston rod extend past the Retaining

Nut (PAT-CP-1506). With a wrench lightly tighten Retaining Nut (PAT-CP-1506)

until the nut bottoms out on the Outlet Body.

5. Screw the Lock Nut (PAT-CP-1518) onto the Outlet Body (PAT-CP-1503) until

the nut bottoms out.

6. Install the Ball Seat O-ring (O-F-110) into the Inlet Body (PAT-CP-1502). Make

sure o-ring is in its groove completely.

7. Install O-ring (O-S-018) into its seat area of Inlet Body (PAT-CP-1502). Install

Ball (9201-1-14) into Inlet Body (PAT-CP-0902).

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

No comments

Magnum-venus-plastech PATRIOT PAT-CP-1530-ADH User Manual Page 19